Hardware (and firmware)


Python SDK Install Error [SDK] (5)
Battery Connector specification for Dash & Dash Pro [Dash] (6)
run hologram modem connect automatically after boot raspberry pi [Nova] (6)
UART on DASH global [Dash] (2)
Reset user processor [Dash] (2)
Stuck on how to compile the Dash System firmware [Dash] (3)
Dash Power Switch Viable? [Dash] (6)
Battery Charger rate [Dash] (4)
send message fails with est. netwk. conn. [Dash] (9)
OTA - Dash powered on vs. powered off [Dash] (8)
Dash USB serial port problems [Dash] (6)
Need help with OTA please [Dash] (2)
Nova - over the air update [Nova] (4)
Pycom GPy [3rd Party Cellular Hardware] (10)
Python install failure Pi3 [SDK] (2)
Serial2 read errors [Dash] (11)
Can't make an XBEE3 LTE Cat 1 connect [3rd Party Cellular Hardware] (4)
antenna orientation? trouble getting constant connection [Dash] (4)
Missing Dash USB in Arduino IDE [Dash] (3)
Nova R404 will not enumerate [Nova] (7)
Using the GPy from Pycom integrated with Hologram [3rd Party Cellular Hardware] (4)
Difference between hologram network connect and hologram modem connect? [Nova] (2)
Persistent PPP connection and hologram network connect on startup [SDK] (5)
Anyone successfully connected with a Huawei e352? [3rd Party Cellular Hardware] (4)
Able to connect to network with Raspi / Nova R404M, But can't send/receive [Nova] (2)
Multiple SPI Devices? [Dash] (9)
Signal error but signal strength is good [Dash] (15)
RF24 library silently fails on Dash [Dash] (3)
Tale of two Dashes [Dash] (11)
USA Cat M1 Hardware [Nova] (3)