Can someone with a new Nova Global / LTE-M1 run the following AT command and post the results?
AT&V
Expected Results (values will vary):
AT&V
ACTIVE PROFILE: &C: 1; &D: 1; &F: 0; Q: 0; V: 1; X: 1; Z: 0; &S: 1;
&W: 0; \Q: 3; E: 1; L: 0; M: 0; &K: 3; &Y: 0; O: 0; S0: 0; S4: 10; S5: 8;
S6: 2; S7: 0; S8: 2; S10: 14; S3: 13; S2: 43; S12: 50; +ICF: 3,1;
+IFC: 2,2; +IPR: 115200; +CMEE: 2; +WS46: 12; +CFUN:; +UAUTHREQ: 1,0,"";
+CEREG: 0; +CEMODE: 2; +CSCS: "IRA"; +CRC: 0; +CGDCONT: (1,"IPV4V6","","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0),(2,"IPV4V6","VZWADMIN","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0),(3,"IPV4V6","vzwinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0),(6,"IPV4V6","VZWCLASS6","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0)
; +CGDSCONT: ; +CGEREP: 0,0; +CGSMS: 1; +CSMS: 0; +CMGF: 0; +CSAS: 0;
+CRES: 0; +CSCA: "",; +CSMP: ,,0,0; +CREG: 0; +CGREG: 0;
+CGPIAF: 0,0,0,0; +CSDH: 0; +CPIN: ⸮⸮⸮⸮⸮⸮⸮⸮,⸮⸮⸮⸮⸮⸮⸮⸮; +CMER: 0,0,0,0,0;
+CPMS: "ME","ME","ME"; +CNMI: 0,0,0,0,0; +CMMS: 0; +COPS: 0,0,"";
+CGATT: 0; +CGACT(1,0),(2,0),(3,0),(6,0); +CPOL: 0,2,"",0,0,0,0;
+CPLS: 0; +CTZR: 0; +CTZU: 0; +CSDF: 1; +CUSD: 0;
+CIND: 5,3,0,0,0,0,1,0,0,0,0,0; +CPSMS: 0,"","","",""; +CEDRXS: 0,1,"";
+URAT: 0,0; +UMNOPROF: 0; +UPSV: 0,0
OK
I am using the U-Blox SARA-R410M (same as on this nova) and I’m interested in how Hologram has configured the device. It looks like a lot of settings I think are required are not explicitly set in their python sdk so I am guessing they are already programmed in the device.
Thanks!
Note my specific problem is having is getting the SARA-R410M to connect without setting a UMNOPROF to the appropriate physical network carrier (Verizon in US or Telstra for Australia). I do explicitly set the APN to hologram. To solve this problem I have to cycle through the carrier profiles after a certain timeout (exp. increasing) of not connecting. It seems the Nova does not require this process and I want to figure out why.