Hi Ernesto, I don’t think anything is wrong with your CGDCONT result…I think you have the option of having three different APNs if you choose to, but you don’t have to.
I should have asked earlier, but I’m guessing your goal is to send data/messages back and forth to the Hologram cloud.
I used this Hologram tutorial when I set up my SIM7000:
Look about half-way down, “Connecting using the Hologram SIM”.
I have the SIM808, SIM5320, SIM7000, and SIM7600. There are alot of similar AT commands between all four chips. Anyways, the SIM7000 tutorial above may go a long way to help set up your SIM800 by following the AT commands there.
Of course the AT+CNMP=38 won’t apply in your case, and there may be others that won’t apply to the 800, I haven’t checked through all those.
Anyways, the tutorial should be a good start, I’ll dig around some more and check for AT command differences between the two chips over the next day or so. I’m curious to see if the 800 will hook up. In the meantime, hope the tutorial helps!