I am testing a SIMCOM7000G shield for arduino. I am using an old SIM (8944500410165939643). I am getting Not Registered.
Do I have to order a new SIM?. I am located in Miramar, Florida, 33027
Thanks,
Anatoly
FONA basic test
Initializing…(May take several seconds)
Configuring to 9600 baud
Attempting to open comm with ATs
—> AT
<— OK
—> ATE0
<— OK
—> ATE0
<— OK
—> ATI
<— SIM7000G R1351
OK
---> AT+CPMS="SM","SM","SM"
<--- +CPMS: 0,10,0,10,0,10
FONA is OK
Found SIM7000G (Global)
—> AT+GSN
<— 869951030010098
Module IMEI: 869951030010098
—> AT+CFUN=1
<— OK
—> AT+CGDCONT=1,“IP”,“hologram”
<— OK
[?] Print this menu
[a] Read the ADC; 2.8V max for SIM800/808, 0V-VBAT for SIM7000 shield
[b] Read supply voltage
[C] Read the SIM CCID
[U] Unlock SIM with PIN code
[i] Read signal strength (RSSI)
[n] Get network status
[1] Get network connection info
[N] Number of SMS’s
[r] Read SMS #
[R] Read all SMS
[d] Delete SMS #
[s] Send SMS
[u] Send USSD
[y] Enable local time stamp (SIM800/808/7000)
[Y] Enable NTP time sync (SIM800/808/7000)
[t] Get network time
[G] Enable cellular data
[g] Disable cellular data
[l] Query GSMLOC (2G)
[w] Read webpage
[W] Post to website
[2] Post to dweet.io via 2G / LTE CAT-M / NB-IoT
[3] Post to dweet.io via 3G / 4G LTE
[O] Turn GPS on (SIM808/5320/7000)
[o] Turn GPS off (SIM808/5320/7000)
[L] Query GPS location (SIM808/5320/7000)
[E] Raw NMEA out (SIM808)
[S] Create serial passthru tunnel
FONA> n
—> AT+CGREG?
<— +CGREG: 0,0
Network status 0: Not registered
FONA>