Hardware (and firmware)   3rd Party Cellular Hardware


Topic Replies Activity
About the 3rd Party Cellular Hardware category 1 November 28, 2017
Pycom GPy Cat-M1 Stopped Attaching 2 November 8, 2019
Efento don't work with Hologram sim? 4 November 1, 2019
PyGo2 Compatibility 3 October 23, 2019
Proper modem for Brazil 2 October 19, 2019
GPRS Issues 3 October 15, 2019
Arduino GSM - Sending Message Issue 5 October 12, 2019
LED Status meaning on the SIM800L EVB V2.2 10 September 10, 2019
AT&T IoT Starter Kit V2 6 September 21, 2019
Cannot receive SMS on device 8 August 28, 2019
Pycom GPY not attaching in Houston, TX USA 3 August 25, 2019
Raspberry Pi 3 and Sixfab shield gsm/gprs 3 August 22, 2019
Sparkfun LTE Shield Rcv but not Snd 3 August 20, 2019
CREG 3 was working before, works in cell phone, full diagnostics inside. 4 August 16, 2019
NO CARRIER Sending SMS using SIXFAB hat on Raspberry Pi 3 2 August 4, 2019
No Data communication 5 July 19, 2019
Hologram SIM - NB-IoT not working 6 July 11, 2019
Get GPS location with SIM7000E on raspberry pi? 2 July 5, 2019
Cannot connect with hologram sim 7 June 23, 2019
PDP deactivates itself every hour 2 June 1, 2019
Hologram & iPad Pro 12.9" 2 May 24, 2019
Teltonika FM36M1 not working with Hologram 4G 3 May 15, 2019
LCP terminated by peer, Pi using SIM800 2 May 4, 2019
Telit NVM backup 3 May 1, 2019
Sequans 6 April 21, 2019
Teltonika Rut240 2 April 20, 2019
Hologram SIM not working on Particle Boron 15 April 1, 2019
MKR 1400 and hologram cloud coding help ifttt 2 March 17, 2019
options for battery operated Mcu+modem 9 March 9, 2019
Huawei E303 external antenna? 11 February 8, 2019